Canada

MDC2 Series Single Valve MDC2X27XNAEXCXA

Actual product may differ from above image. Product details should be verified before purchase.
  • Can achieve Category 2, PL c, when used with proper safety controls
  • The “fail-to-safe” safety function is ensured as long as the poppet is able to go back into the start position
  • The Cat 2 version (MDC2) of the MDC Series is equipped with a solid state pressure sensor.
  • Monitoring the sensor on each actuation and de-actuation of the MDC2 Series valve provides a diagnostic coverage between 60% < 90%
  • Poppet Design that is dirt tolerant, wear compensating for quick response and high flow capacity
  • PTFE backup piston rings enhances valve endurance enabling operation with or without in-line lubrication
  • On energization, the Soft-Start (EEZ-ON®) allows outlet pressure to increase at a slower rate until it reaches approximately 50% of inlet pressure, at which point the valve will then open fully to finish filling the system at full rate
  • Threaded or modular port connection allows connection to Air Entry System (Lockout Valve, FRLs)
  • Threaded exhaust port for canister silencer or remote exhaust
  • SISTEMA Library available for download

Need Help? No Problem!

Customer Service

+1 (416) 251-7677

Technical Service
+1 (416) 251-7677

Need Help? No Problem!

Customer Service

+1 (416) 251-7677

Technical Service
+1 (416) 251-7677


Product Information

Thread Type NPT
Inlet Size 1-1/4"
Outlet Size 1-1/4"
Exhaust Size 1-1/2"
Construction Poppet
Actuation Electrical
Soft Start Not Included
Lockout Not Included
Monitoring External
Feedback Pressure Switch (PNP)
Reset Not Included
Basic Size 1"
Exhaust Type Threaded Female Port
Feedback Rating 5 amps at 250 volts AC, or 5 amps at 30 volts DC
Voltage 24 VDC
Solenoid Connection DIN EN 175301-803 Form A
Feedback Connection M12
Operating Pressure 36 to 150 psig (2.5 to 10.3 bar)
Pressure Gauge No Gauge
Weight 9.35 lbs (4.24 kg)
Mounting Inline
Ambient Temperature Range (Celcius) 4 to 50
Media Temperature Range (Celcius) 4 to 80
Flow Media Compressed Air
Valve Body Material Aluminum
Poppet/Spool Material Acetal and Stainless Steel
Seal Material Buna-N
Safety Category Category 2
PL Rating PL c
Safety Integrity Level SIL 1
DGUV Certification Pending
CE Certification Yes
EAC Declaration Yes
CSA/UL Certification Yes